Now, time to see the output. If your output is not showing make sure your connections are ok and the LCD you have is not broken in any way. Also make sure that you have properly programmed the 8051 Microcontroller. Following video shows the output video of this chapter:
Now its time you should experiment from what you have learned. Try to make stuff on your own. There are many more ideas which might be bumping in your mind. try to make that ideas into reality. The more you do, the more you learn. Its the end of the chapter now, We have covered a lot of things which are necessary as a beginner to learn in embedded system. We hope that you have learned a lot of things from this blog. Do suggest other about this blog. And yes, this is not the end yet, we will updating the blog with new tutorials and technologies. Don't forget to share what you have made. We are really excited to see the results of this open-source blog. Happy learning :)
No comments:
Post a Comment
Stuck Somewhere ? Comment Your Queries and Experts will Guide You.